SIMISA@@@@@@@@@@JINX0D0t______

Wagon ( SS3B_6063A  
	comment(SS3B_6063A.s )
	Type ( Engine )
	WagonShape ( SS3B_6063A.s )
	
	size ( 3.0m 3.40m 20.45m)  

	Mass ( 138t )
	WheelRadius ( 0.625m )
	InertiaTensor ( Box ( 3.0m 3.40m 20.45m) )
	
Coupling (
		Type ( Automatic )
		Spring (
			Stiffness ( 5e6N/m 0  )
			Damping ( 2e6N/m/s 0 )
			Break ( 3e7N 0 )
			r0 ( 8cm 1e9 )
		)
		CouplingHasRigidConnection ()
	)

	Buffers (
		Spring (
			Stiffness ( 1e7N/m 0 )
			Damping ( 2e6N/m/s 0 )
			r0 ( 0m 1e9 )
		)
		Centre ( 0.0 )
		Radius ( 1 )
		Angle ( 0.4deg )
	)
  
	Adheasion ( 5000 10000 20000 0 )
	DerailRailHeight ( 4cm )
	DerailRailForce ( 2.5*126t )
	DerailBufferForce ( 156kN )
	NumWheels ( 24 )
	Friction (
	11N/m/s		1		 60mph	11N/m/s                        1
		2.1N/rad/s		1		1rad/s		0		1
	)

	AntiSlip ()

	BrakeEquipmentType( "Graduated_release_triple_valve, Auxilary_reservoir, Emergency_brake_reservoir" )
	BrakeSystemType( "Air_single_pipe" )
	MaxBrakeForce( 400kN )

	EmergencyBrakeResMaxPressure( 55.2 )
	TripleValveRatio( 3 )
	MaxReleaseRate( 4 )
	MaxApplicationRate( 5 )
	MaxAuxilaryChargingRate( 5 )
	EmergencyResCapacity( 4 )
	EmergencyResChargingRate( 5 )
	BrakeCylinderPressureForMaxBrakeBrakeForce( 55.2 )
	EmergencyResVolumeMultiplier( 1 )
	BrakeAirPressureGainInResForOnePoundFromPipe( 0.5 )



	Lights	( 7
		Light	(
			comment( Sphere of light )
			Type( 1 )
			Conditions (
				Headlight ( 3 )
				Unit ( 2 )
				)
			Cycle	( 0 )
			FadeIn	( 0.5 )
			FadeOut	( 0.5 )
			States	(	1
				State	(
							Duration ( 0.0 )
							LightColour ( ffffffff )
							Position ( 0.0 3.75 7.61 )
							Transition ( 0 )
							Radius ( 400.0 )
							Angle ( 20.0 )
								)
				)
			)
			

		Light	(
			comment( Head light right dim )
			Type( 0 )
			Conditions (
				Headlight ( 2 )
				Unit ( 2 )
				)
			FadeIn	( 0.5 )
			FadeOut	( 0.5 )
			Cycle	( 0 )
			States	( 1
				State	(
					Duration ( 0.0 )
					LightColour ( 80ffffbb )
					Position ( -1.075  2.135 10.074)
					Azimuth ( 0.0 0.0 0.0 )
					Transition ( 0 )
					Radius ( 0.75 )
					Elevation ( 0.0 0.0 0.0 )
					)
				)
			)
			
		Light	(
			comment( Head light left dim )
			Type( 0 )
			Conditions (
				Headlight ( 2 )
				Unit ( 2 )
				)
			FadeIn	( 0.5 )
			FadeOut	( 0.5 )
			Cycle	( 0 )
			States	( 1
				State	(
					Duration ( 0.0 )
					LightColour ( 80ffffbb )
					Position ( 1.075  2.135 10.074)
					Azimuth ( 0.0 0.0 0.0 )
					Transition ( 0 )
					Radius ( 0.75 )
					Elevation ( 0.0 0.0 0.0 )
					)
				)
			)
			
		Light	(
			comment( Head light top  bright )
			Type( 0 )
			Conditions (
				Headlight ( 3 )
				Unit ( 2 )
				)
			FadeIn	( 4.5 )
			FadeOut	( 4.5 )
			Cycle	( 0 )
			States	( 1
				State	(
					Duration ( 0.0 )
					LightColour ( ffccffcc )
					Position (  0.0 4.072 9.814)
					Azimuth ( 0.0 0.0 0.0 )
					Transition ( 0 )
					Radius ( 1.2 )
					Elevation ( 0.0 0.0 0.0 )
					)
				)
			)







		Light	(
			comment( Head light right bright )
			Type( 0 )
			Conditions (
				Headlight ( 3 )
				Unit ( 2 )
				)
			FadeIn	( 3.5 )
			FadeOut	( 0.5 )
			Cycle	( 0 )
			States	( 1
				State	(
					Duration ( 0.0 )
					LightColour ( fff5c37b )
					Position (-1.075  2.135 10.074 )
					Azimuth ( 0.0 0.0 0.0 )
					Transition ( 0 )
					Radius ( 0.75 )
					Elevation ( 0.0 0.0 0.0 )
					)
				)
			)
			
		Light	(
			comment( Head light left bright )
			Type( 0 )
			Conditions (
				Headlight ( 3 )
				Unit ( 2 )
				)
			FadeIn	( 3.5 )
			FadeOut	( 0.5 )
			Cycle	( 0 )
			States	( 1
				State	(
					Duration ( 0.0 )
					LightColour ( fff5c37b )
					Position (  1.075  2.135 10.074)
					Azimuth ( 0.0 0.0 0.0 )
					Transition ( 0 )
					Radius ( 0.75 )
					Elevation ( 0.0 0.0 0.0 )
					)
				)
			)
		
		Light	(
			comment( Red light left back )
			Type( 0 )
			Conditions (
				Headlight ( 3 )
				Unit ( 3 )
				)
			FadeIn	( 0.5 )
			FadeOut	( 0.5 )
			Cycle	( 0 )
			States	( 1
				State	(
					Duration ( 0.0 )
					LightColour ( ffff0000 )
					Position ( -0.872  2.135 -10.16)
					Azimuth ( -180 -180 -180 )
					Transition ( 0 )
					Radius ( 0.45 )
					Elevation ( 0.0 0.0 0.0 )
					)
				
			)	
	)
)

	Sound ( "..\\..\\SS7EMK\\Sound\\e189eng.sms" )

)

Engine ( SS3B_6063A
	Wagon ( SS3B_6063A )
	Type ( Electric )
	MaxPower ( 5000kW )
	MaxForce ( 350kN )
	MaxContinuousForce ( 230kN )
	MaxVelocity ( 120kmh )
	MaxCurrent ( 2500A )
	WheelRadius ( 0.625m )
	Sanding ( 1e9mph )
	NumWheels ( 1 )

	CabView ( "SS3B_6063.cvf" )
	HeadOut ( -2.0 3.0 7.0 )

	AirBrakesAirCompressorPowerRating( 1 )
	AirBrakesMainMinResAirPressure( 250 )
	AirBrakesMainMaxAirPressure( 400 )
	AirBrakesMainResVolume( 100 )
	AirBrakesAirCompressorWattage( 10000 )
	AirBrakesCompressorRestartPressure( 180 )
	AirBrakesAirUsedPerPoundsOfBrakePipePressure( 1 )
	AirBrakesIsCompressorElectricOrMechanical( 0 )

	EngineBrakesControllerDirectControlExponent( 1 )
      TrainBrakesControllerDirectControlExponent( -1 )

	TrainBrakesControllerMinPressureReduction( 6 )
	EngineBrakesControllerHasProportionalBrake( 1 )
	EngineBrakesProportionalBrakeLag( 1 )
	EngineBrakesControllerMaxApplicationRate( 10 )
	TrainBrakesControllerMaxApplicationRate( 2 )
	EngineBrakesControllerMaxReleaseRate( 10 )
	TrainBrakesControllerMaxReleaseRate( 2 )
      TrainBrakesControllerMaxQuickRelaseRate( 2.5 )
	EngineBrakesControllerEmergencyApplicationRate( 20 )
	TrainBrakesControllerEmergencyApplicationRate( 20 )
	EngineBrakesControllerMinSystemPressure( 0 )
	TrainBrakesControllerMinSystemPressure( 0 )
	EngineBrakesControllerMaxSystemPressure( 72.5 )
	TrainBrakesControllerMaxSystemPressure( 72.5 )
	EngineBrakesControllerEmergencyBrakeTimePenalty( 0 )
	TrainBrakesControllerEmergencyBrakeTimePenalty( 0 )
	EngineBrakesControllerFullServicePressureDrop( 21.7 )
	TrainBrakesControllerFullServicePressureDrop( 21.7 )
  
	
	DynamicBrakesMinUsableSpeed( 2 )
	DynamicBrakesMaximumEffectiveSpeed( 150 )
	DynamicBrakesMaximumForce( 460kN )
	DynamicBrakesResistorCurrentLimit ( 1000 )
	DynamicBrakesCutInSpeed( 1 )
	DynamicBrakesMaxAirBrakePressure ( 145 )
	DynamicBrakesFadingSpeed( 45 )
	DynamicBrakesDelayTimeBeforeEngaging ( 0 )
	DynamicBrakesMaximumSpeedForFadeOut ( 75 )
	DynamicBrakesEffectAtMaximumFadeOut( 0 )
	DynamicBrakesHigherSpeedCurveExponent( 1 )
	DynamicBrakesLowerSpeedCurveExponent( 1 )
	DynamicBrakesNumberOfControllerNotches( 9 )


      TrainPipeLeakRate( 1 )

	

	BrakesEngineBrakeType( "Air_single_pipe" )
	BrakesTrainBrakeType( "Air_single_pipe" )
        BrakesEngineControllers( "Independent, Train, Dynamic" )
      
	DoesBrakeCutPower( 1 )
	DoesHornTriggerBell( 0 )
	BrakeCutsPowerAtBrakeCylinderPressure( 14.5 )

    	EmergencyStopMonitor(
    		MonitoringDeviceMonitorTimeLimit( 0 )
    		MonitoringDeviceAlarmTimeLimit( 0 )
    		MonitoringDevicePenaltyTimeLimit( 0 )
    		MonitoringDeviceCriticalLevel( 0 )
    		MonitoringDeviceResetLevel( 0 )
    		MonitoringDeviceAppliesFullBrake( 0 )
    		MonitoringDeviceAppliesEmergencyBrake( 1 )
    		MonitoringDeviceAppliesCutsPower( 1 )
    		MonitoringDeviceAppliesShutsDownEngine( 0 )
    		)
		
	VigilanceMonitor(
		MonitoringDeviceMonitorTimeLimit( 40 )
		MonitoringDeviceAlarmTimeLimit( 30 )
		MonitoringDevicePenaltyTimeLimit( 0 )
		MonitoringDeviceCriticalLevel( 0 )
		MonitoringDeviceResetLevel( 0 )
		MonitoringDeviceAppliesFullBrake( 0 )
		MonitoringDeviceAppliesEmergencyBrake( 1 )
		MonitoringDeviceAppliesCutsPower( 1 )
		MonitoringDeviceAppliesShutsDownEngine( 0 )
		MonitoringDeviceResetOnZeroSpeed ( 1 )
		)

	OverspeedMonitor(
		MonitoringDeviceMonitorTimeLimit( 0 )
		MonitoringDeviceAlarmTimeLimit( 5 )
		MonitoringDevicePenaltyTimeLimit( 0 )
		MonitoringDeviceCriticalLevel( 139 )
		MonitoringDeviceResetLevel( -1 )
		MonitoringDeviceAppliesFullBrake( 0 )
		MonitoringDeviceAppliesEmergencyBrake( 1 )
		MonitoringDeviceAppliesCutsPower( 1 )
		MonitoringDeviceAppliesShutsDownEngine( 0 )
		MonitoringDeviceTriggerOnTrackOverspeed( 1 )
		MonitoringDeviceTriggerOnTrackOverspeedMargin( 2 )
		MonitoringDeviceResetOnZeroSpeed( 1 )
		MonitoringDeviceResetOnResetButton( 0 )
		)
	
        EngineControllers (
            Throttle ( 0 1 0.04 0 
                NumNotches ( 0 )
            )
           Brake_Train ( 0 1 0.05 0.4 
                NumNotches ( 7
                    Notch ( 0    0 TrainBrakesControllerFullQuickReleaseStart )
                    Notch ( 0.1  0 TrainBrakesControllerReleaseStart )
                    Notch ( 0.2  0 TrainBrakesControllerHoldLappedStart )
                    Notch ( 0.25 1 TrainBrakesControllerGraduatedSelfLapLimitedHoldingStart )
                    Notch ( 0.85 0 TrainBrakesControllerSuppressionStart )
                    Notch ( 0.9  0 TrainBrakesControllerContinuousServiceStart )
                    Notch ( 0.95 0 TrainBrakesControllerEmergencyStart )
                )
            )

             Brake_Engine ( 0 1 0.0125 0 
                NumNotches ( 1
                	Notch( 0  1 Dummy )
			
                )
            )

            Brake_Dynamic ( 0 1 0.02 0 
                NumNotches ( 0 )
            )

Combined_Control( 0 1 0.5 0.5 throttle dynamic )
            DirControl ( -1 0 1 1 )
            EmergencyStopToggle( 0 1 0 )
            AWS ( 0 1 0 )
            Sanding ( 0 1 0 )
            Horn ( 0 1 0 )
            Vigilance ( 0 1 0 )
            PantographToggle1 ( 0 1 1 )
            Headlights ( 0 0.25 1 0 )
            Wipers ( 0 1 0 )
            BellToggle( 0 1 0 )
            BailOffButton( 0 1 0 )
        )

    	Sound ( "..\\..\\SS7EMK\\Sound\\e189cab.sms" )


    	Name ( "SS3B_6063" )
        Description (
	"This double locomotives benefit high traction effort,representing Siemens 2nd generation Eurosprinter Family.\n"+
       "Wheel arrangement:2Bo-Bo\n"+
       "Continuous rating at wheel:6400Kw\n"+
       "Starting traction effort:700Kn\n"+
       "Continuous traction effort:460Kn\n"+
       "Axle load:23t\n"+
       "Mass:2*92t\n"+
       "Max. Speed:120km/h\n"+
       "Made by Clkgtr\n"+
       "hakuna1981@163.com\n"     )  
        EngineOperatingProcedures (
        "To move forward\n"+
        "1. The pantograph has been raised for you. (If it is not up for some reason, press the P key to raise it.)\n"+
	"2.	Press the W key to move the Reverser to Forward.\n"+
	"3.	Press the ; (SEMICOLON) key to release the train brakes.\n"+
	"4. 	Press the [ (LEFT BRACKET) key to release the locomotive brake.\n"+
	"5.	Press the D key to move increase the Throttle setting.\n\n"+  
	"To slow the train\n"+
	"1.	Press the A key to move the throttle to a lower setting.\n"+
	"2.	Use the brakes to further reduce speed if desired.\n\n"+
	"To apply the train brakes\n"+
	"1.	Press the ' (APOSTROPHE) key to apply the train brakes.\n\n"+
	"To release the train brakes\n"+
	"1. Press the ; (SEMICOLON) key to release the train brakes.\n\n"+
	"To bail off the train brakes on the locomotive\n"+
	"1. Press the / (FORWARD SLASH) key.\n\n"+
	"To apply the locomotive brake\n"+
	"1.	Press the ] (RIGHT BRACKET) key to apply the locomotive brake.\n\n"+
		"To release the locomotive brake\n"+
	"1. Press the [ (LEFT BRACKET) to release the locomotive brake.\n\n"+
	"To activate emergency braking\n"+
	"1.	Press the A key to reduce the throttle to Idle.\n"+
	"2.	Press the BACKSPACE key to activate emergency braking.\n\n"+
	"To back up\n"+
	"1.	Bring your train to a full stop.\n"+
	"2.	Press the S key to move the Reverser to the Reverse position.\n"+
	"3.	Press the ; (SEMICOLON) key and the [ (LEFT BRACKET) key to release the brakes.\n"+
	"4.	Slowly advance the throttle lever (D key).\n\n"+
	"To load and unload passengers\n"+
	"1. Stop at a station.\n"+
	"2. Press the ENTER key.\n"+
	"3. Wait for the 'permission to depart' signal.\n"+
	"TIP: Use the Next Station driving aid (F10) to monitor loading and unloading.\n\n"+
	"To couple to a car or locomotive\n"+
	"1. Coast into the unit at a very slow speed, about 2 mph.\n"+
	"TIP: To use the Coupling view, press the 6 key.\n"+
	"2. Press F9 to open the Train Operations window.\n"+
	"3. If the icon for the unit you coupled to is red, the handbrake is on. Double-click the car to release the handbrake.\n"+
	"4. Close the Train Operations window.\n\n"+
	"To uncouple from a car or locomotive\n"+
	"1. Press F9 to open the Train Operations window.\n"+
	"2. Double-click a unit in the part of the train you want to uncouple from the locomotive, to set the handbrake.\n"+
	"3. Double-click the coupler between the units you want to uncouple and the rest of the train.\n"+
	"4. Close the Train Operations window."
        ) 
)
