SIMISA@@@@@@@@@@JINX0D0t______

Wagon ( N151_crane_BT 
	Type ( Engine )
	WagonShape ( N151_crane_BT.s )
	Size ( 3.14m 4.603m 7.818m )  
	Mass ( 92t )
	WheelRadius ( 36in/2 )
	InertiaTensor ( Box ( 3.14m 4.603m 7.818m ) )

	Coupling (
		Type ( Automatic )
		Spring (
			Stiffness ( 1e6N/m 5e6N/m  )
			Damping ( 1e6N/m 1e6N/m  )
			Break ( 5e7N 5e7N )
			r0 ( 20cm 30cm )
		)
		Velocity ( 0.1m/s )
	)
	Buffers (
		Spring (
			Stiffness ( 1e7N/m 0 )
			Damping ( 1e6N/m/s 0 )
			r0 ( 0m 1e9 )
		)
		Centre ( 0.5m )
		Radius ( 1m )
		Angle ( 0.5deg )
	)
	Adheasion ( 0.2 0.4 2 0 )
	DerailRailHeight ( 4cm )
	DerailRailForce ( 2.5*158t )
	DerailBufferForce ( 200kN )
	NumWheels (	8 )
	Friction (
		1876N/m/s		0		 1mph	 	23.50N/m/s	     1.8
		5.1N/rad/s		1		-1rad/s		0		1
	)
	AntiSlip ()

	BrakeEquipmentType( "Triple_valve, Auxilary_reservoir, Emergency_brake_reservoir" )

	BrakeSystemType( "Air_single_pipe" )
	MaxBrakeForce ( 200kN )
	
	EmergencyBrakeResMaxPressure( 110 )
	TripleValveRatio( 2.5 )
	MaxReleaseRate( 30 )
	MaxApplicationRate( 25 )
	MaxAuxilaryChargingRate( 20 )
	EmergencyResCapacity( 10 )
	EmergencyResChargingRate( 25 )
	BrakeCylinderPressureForMaxBrakeBrakeForce( 70 )


	IntakePoint ( 3.33 0.4 FuelDiesel )

	Lights	(	4
		Light	(
			comment( Sphere of light )
			Type		( 1 )
			Conditions	(
				Headlight ( 3 )
				Unit ( 1 )
				)
			Cycle	( 0 )
			FadeIn	( 0.5 )
			FadeOut	( 0.5 )
			States	(	1
				State	(
					Duration ( 0.0 )
					LightColour ( ffffffff )
					Position ( 0.0 3.5 18 )
					Transition ( 0 )
					Radius ( 450.0 )
					Angle ( 15.0 )
					)
				)
			)
		Light	(
			comment( Sphere of light )
			Type		( 1 )
			Conditions	(
				Headlight ( 3 )
				Unit ( 2 )
				)
			Cycle	( 0 )
			FadeIn	( 0.5 )
			FadeOut	( 0.5 )
			States	(	1
				State	(
					Duration ( 0.0 )
					LightColour ( ffffffff )
					Position ( 0.0 3.5 18 )
					Transition ( 0 )
					Radius ( 450.0 )
					Angle ( 15.0 )
					)
				)
			)
		Light	(
			comment( Head light Right dim )
			Type		( 0 )
			Conditions	(
				Headlight ( 2 )
				Unit ( 0 )
				)
			FadeIn	( 0.5 )
			FadeOut	( 0.5 )
			Cycle	( 0 )
			States	(	1
				State	(
					Duration ( 0.0 )
					LightColour ( 80ffffff )
					Position ( 0.0 0.6 3.5 )
					Azimuth ( 0.0 -5.0 5.0 )
					Transition ( 0 )
					Radius ( 0.5 )
					)
				)
			)
		Light	(
			comment( Head light Right bright )
			Type		( 0 )
			Conditions	(
				Headlight ( 3 )
				Unit ( 0 )
				)
			FadeIn	( 0.5 )
			FadeOut	( 0.5 )
			Cycle	( 0 )
			States	(	1
				State	(
					Duration ( 0.0 )
					LightColour ( ffffffff )
					Position ( 0.0 0.6 3.5 )
					Azimuth ( 0.0 -5.0 5.0 )
					Transition ( 0 )
					Radius ( 0.5 )
					)
				)
			)
		)
    	Sound (	"CRANEEng.sms" )
	)

Engine ( N151_crane_BT
	Effects
	(
		DieselSpecialEffects
		(
			comment
			(
				the format of these little blocks is as follow:

				offset.x offset.y offset.z
				normal.x normal.y normal.z
				width in metres

				defining the offset from the shape pivot point
				where steam / smoke should appear, the direction
				it should go and the width of the nozzle
			)

			Exhaust1
			(
                                1.5 3.8 3.4
				0 1 0
				0.25
			)
		)
        )
        
	Wagon ( N151_crane_BT )
	Type ( Diesel )
	MaxPower ( 1990kw )
	MaxForce ( 180kN  )
	MaxContinuousForce ( 160kN )
	RunUpTimeToMaxForce ( 25.0 )
	MaxVelocity ( 20kmh )
	MaxCurrent ( 1500A )
	WheelRadius ( 18in )
	Sanding ( 9mph #sanding system is switched off when faster than given velocity )

	NumWheels ( 1 )
	MaxTemperature ( 120 )
	MaxOilPressure ( 70 )

	CabView ( CRANE.cvf )
	HeadOut (1.84 3.8 1.4 )

	MaxDieselLevel ( 800gal )
	DieselUsedPerHourAtMaxPower ( 26gal )
	DieselUsedPerHourAtIdle ( 1.5gal)

	AirBrakesAirCompressorPowerRating( 1.2 )
	AirBrakesMainMinResAirPressure( 0 )
	AirBrakesMainMaxAirPressure( 90 )
	AirBrakesMainResVolume( 8 )
	AirBrakesAirCompressorWattage( 19000 )
	AirBrakesCompressorRestartPressure( 87 )
	AirBrakesAirUsedPerPoundsOfBrakePipePressure( 0.22 )
	AirBrakesIsCompressorElectricOrMechanical( 1 )

	EngineBrakesControllerMinPressureReduction( 6 )
	TrainBrakesControllerMinPressureReduction( 6 )
	EngineBrakesControllerHasProportionalBrake( 1 )
	EngineBrakesProportionalBrakeLag( 0.9 )
	EngineBrakesControllerMaxApplicationRate( 20 )
	TrainBrakesControllerMaxApplicationRate( 20 )
	EngineBrakesControllerMaxReleaseRate( 15 )
	TrainBrakesControllerMaxReleaseRate( 4 )
	EngineBrakesControllerEmergencyApplicationRate( 50 )
	TrainBrakesControllerEmergencyApplicationRate( 50 )
	EngineBrakesControllerMinSystemPressure( 0 )
	TrainBrakesControllerMinSystemPressure( 0 )
	EngineBrakesControllerMaxSystemPressure( 90 )
	TrainBrakesControllerMaxSystemPressure( 90 )
	EngineBrakesControllerEmergencyBrakeTimePenalty( 60 )
	TrainBrakesControllerEmergencyBrakeTimePenalty( 60 )
	EngineBrakesControllerFullServicePressureDrop( 26 )
	TrainBrakesControllerFullServicePressureDrop( 26 )


	DynamicBrakesMinUsableSpeed( 5 )
	DynamicBrakesMaximumEffectiveSpeed( 25 )
	DynamicBrakesMaximumForce( 20000 )
	DynamicBrakesResistorCurrentLimit ( 3000 )
	DynamicBrakesCutInSpeed( 8 )
	DynamicBrakesMaxAirBrakePressure ( 15 )
	DynamicBrakesFadingSpeed( 25 )
	DynamicBrakesDelayTimeBeforeEngaging ( 10 )
	DynamicBrakesMaximumSpeedForFadeOut ( 55 )
	DynamicBrakesEffectAtMaximumFadeOut( 0 )
	DynamicBrakesHigherSpeedCurveExponent( 1 )
	DynamicBrakesLowerSpeedCurveExponent( 1 )
	DynamicBrakesNumberOfControllerNotches( 10 )


	BrakesEngineBrakeType( "Air_single_pipe"  )
	BrakesTrainBrakeType( "Air_single_pipe" )
        BrakesEngineControllers( "Independent, Train, Dynamic" )
        
        EngineBrakesControllerDirectControlExponent( 1 )


	DieselSmokeEffectInitialMagnitude( .7 )
	DieselSmokeEffectMaxMagnitude( 7 )
	DieselSmokeEffectInitialSmokeRate( .5 )
	DieselSmokeEffectMaxSmokeRate( 7 )


	DieselEngineIdleRPM( 300 )
	DieselEngineMaxRPM( 850 )
	DieselEngineSpeedOfMaxTractiveEffort( 13mph )
	DieselEngineMaxRPMChangeRate( 40 )

  
	DoesHornTriggerBell( 0 )

 	EmergencyStopMonitor(
    		MonitoringDeviceMonitorTimeLimit( 0 )
    		MonitoringDeviceAlarmTimeLimit( 0 )
    		MonitoringDevicePenaltyTimeLimit( 0 )
    		MonitoringDeviceCriticalLevel( 0 )
    		MonitoringDeviceResetLevel( 0 )
    		MonitoringDeviceAppliesFullBrake( 0 )
    		MonitoringDeviceAppliesEmergencyBrake( 1 )
    		MonitoringDeviceAppliesCutsPower( 0 )
    		MonitoringDeviceAppliesShutsDownEngine( 0 )
    		)

	AWSMonitor(
		MonitoringDeviceMonitorTimeLimit( -1 )
		MonitoringDeviceAlarmTimeLimit( 5 )
		MonitoringDevicePenaltyTimeLimit( 0 )
		MonitoringDeviceCriticalLevel( 0 )
		MonitoringDeviceResetLevel( 0 )
		MonitoringDeviceAppliesFullBrake( 0 )
		MonitoringDeviceAppliesEmergencyBrake( 1 )
		MonitoringDeviceAppliesCutsPower( 0 )
		MonitoringDeviceAppliesShutsDownEngine( 0 )
		)
		
	VigilanceMonitor(
		MonitoringDeviceMonitorTimeLimit( 20 )
		MonitoringDeviceAlarmTimeLimit( 10 )
		MonitoringDevicePenaltyTimeLimit( 7 )
		MonitoringDeviceCriticalLevel( 0 )
		MonitoringDeviceResetLevel( 0 )
		MonitoringDeviceAppliesFullBrake( 1 )
		MonitoringDeviceAppliesEmergencyBrake( 0 )
		MonitoringDeviceAppliesCutsPower( 0 )
		MonitoringDeviceAppliesShutsDownEngine( 0 )
		)

	EngineBrakesControllerDirectControlExponent( 1 )

        EngineControllers (
            Throttle ( 0 1 0.125 0 
                NumNotches ( 9
                    Notch ( 0       0 Dummy )
                    Notch ( 0.125   0 Dummy )
                    Notch ( 0.25    0 Dummy )
                    Notch ( 0.375   0 Dummy )
                    Notch ( 0.5     0 Dummy )
                    Notch ( 0.625   0 Dummy )
                    Notch ( 0.75    0 Dummy )
                    Notch ( 0.875   0 Dummy )
                    Notch ( 1       0 Dummy )
                )
            )
            Brake_Engine ( 0 1 0.0250 0 
                NumNotches ( 2
                    Notch( 0   0 EngineBrakesControllerReleaseStart )
                    Notch( 0.3 1 EngineBrakesControllerGraduatedSelfLapLimitedStart )
                )
            )
            Brake_Train ( 0 1 0.0125 0.75 
                NumNotches ( 5
                    Notch( 0    0 TrainBrakesControllerReleaseStart )
                    Notch( 0.3  1 TrainBrakesControllerGraduatedSelfLapLimitedHoldingStart )
                    Notch( 0.85 0 TrainBrakesControllerSuppressionStart )
                    Notch( 0.9  0 TrainBrakesControllerContinuousServiceStart )
                    Notch( 0.95 0 TrainBrakesControllerEmergencyStart )
                )
            )
            Brake_Dynamic ( 0 1 0.0125 0 
                NumNotches ( 3
                    Notch ( 0       0 Dummy )
                    Notch ( 0.0125  1 Dummy )
                    Notch ( 0.0126  1 Dummy )
                 )
            )

	DirControl ( -1 0 1 1 )
            BellToggle( 0 1 0 )
            AWS ( 0 1 0 )
            Sanding ( 0 1 0 )
            Horn ( 0 1 0 )
            Wipers ( 0 1 0 )
            EmergencyStopResetToggle( 0 1 0 )
            EmergencyStopToggle( 0 1 0 )
            Vigilance ( 0 1 0 )
            Headlights ( 0 0.25 1 0 )
		BailOffButton( 0 1 0 )
      )
	comment( fuel_level )
	EngineVariables ( 5300 )
 	Sound (	"cranecab.sms" )

 	Name ( "N151_crane_BT" )
Description (
	"This set was produced with 3D Canvas V4.23 . Cranes of this type are self-powered. This Model however is not prototypical in that it has a much larger power plant than what would be normally found in the real world.  "+
	"  Don’t worry about reality, have fun with it.  .\n\n"+
	"Modeled by Mark Toland, Sep 22 2001\n\n"+ 
	"A non-powered version is included in this set, for those that wish to couple up to the crane set and deliver it to an accident cite.\n\n"+
	"You will find it listed with the other wagons in the consist editor."
	
    	)
 )
 	
    	EngineOperatingProcedures (
    	"To move forward\n"+
	"1.	Press the W key to move the Reverser to Forward.\n"+
	"2.	Press the ; (SEMICOLON) key to release the train brakes.\n"+
	"3.	Press the [ (LEFT BRACKET) key to release the locomotive brake.\n"+
	"4.	Press the D key to move the throttle from Idle to Notch 1.\n"+
	"5.	Gradually increase power (D key), one notch at a time, until your train reaches the desired speed.\n\n"+
	"To slow the train\n"+
	"1.	Press the A key to move the throttle to a lower setting.\n"+
	"2.	Use the brakes to further reduce speed if desired.\n\n"+
	"To apply the dynamic brakes\n"+
	"1.	Press the A key to move the throttle to the Idle position.\n"+
	"2.	Wait for 10 seconds, then press the . (PERIOD) key to advance the Dynamic Brake handle from Off to the Setup position. After allowing a few seconds for braking circuit setup, press the . (PERIOD) key again to set the desired level of dynamic braking (Levels 1 - 8).\n\n"+
	"To release the dynamic brakes\n"+
	"1. Press the D key to move the throttle towards Idle.\n\n"+
	"To apply the train brakes\n"+
	"1.	Press the ' (APOSTROPHE) key to apply the train brakes.\n\n"+
	"To bail off the train brakes on the locomotive\n"+
	"1. Press the / (FORWARD SLASH) key.\n\n"+
	"To release the train brakes\n"+
	"1. Press the ; (SEMICOLON) key to release the train brakes.\n\n"+
	"To apply the locomotive brake\n"+
	"1.	Press the ] (RIGHT BRACKET) key to apply the locomotive brake.\n\n"+
	"To release the locomotive brake\n"+
	"1. Press the [ (LEFT BRACKET) key to release the locomotive brake.\n\n"+
	"To activate emergency braking\n"+
	"1.	Press the A key to reduce the throttle to Idle.\n"+
	"2.	Press the BACKSPACE key to activate emergency braking.\n\n"+
	"To back up\n"+
	"1.	Bring your train to a full stop.\n"+
	"2.	Press the S key to move the Reverser to the Reverse position.\n"+
	"3.	Release the brakes.\n"+
	"4.	Slowly advance the throttle lever (D key).\n\n"+
	"To couple to a car or locomotive\n"+
	"1. Coast into the unit at a very slow speed, about 2 mph.\n"+
	"TIP: To use the Coupling view, press the 6 key.\n"+
	"2. Press F9 to open the Train Operations window.\n"+
	"3. If the icon for the unit you coupled to is red, the handbrake is on. Double-click the car to release the handbrake.\n"+
	"4. Close the Train Operations window.\n\n"+
	"To uncouple from a car or locomotive\n"+
	"1. Press F9 to open the Train Operations window.\n"+
	"2. Double-click a unit in the part of the train you want to uncouple from the locomotive, to set the handbrake.\n"+
	"3. Double-click the coupler between the units you want to uncouple and the rest of the train.\n"+
	"4. Close the Train Operations window."
    	) 

)
